HC Laser Clean-up MaxLine 1030/4
Produktinformationen "HC Laser Clean-up MaxLine 1030/4"
Durchmesser 25 x 3,5 mm
OD 6 947 - 1014 nm und 1045 - 1133 nm
OD 5 1014 - 1019 nm und 1040 - 1368 nm
OD 6 947 - 1014 nm und 1045 - 1133 nm
OD 5 1014 - 1019 nm und 1040 - 1368 nm
Spezifikationen
| OEM-/Originalnummer: | LL01-1030-25 |
|---|---|
| Transmission at laser line: | Tabs > 90% 1030 nm |
| Center Wavelength 1: | 1030 nm |
| typical bandwidth: | 3.9 nm (typical) - 7.2 nm (maximum) |
| Guaranteed Minimum Bandwidth 1: | Transmission guaranteed for laser wavelength only |
| Blocking Band 1: | ODabs > 6 947.6 - 1014.6 nm |
| Blocking Band 2: | ODabs > 5 1014.6 - 1019.7 nm |
| Blocking Band 3: | ODabs > 6 1045.5 - 1133 nm |
| Blocking Band 4: | ODabs > 5 1040.3 - 1368.2 nm |
| Laser Wavelength 1: | 1030 nm |
| Angle of Incidence: | 0 ± 2 degrees |
| Cone Half-angle: | 0.5 degrees |
| Optical Damage Rating: | 0.1 J/cm2 @ 532 nm (10 ns pulse width) |
| Substrate type: | low-autofluorescence optical quality glass |
| Transverse Dimensions (Diameter: | 25 mm |
| Transverse Tolerance: | + 0.0 / - 0.1 mm |
| Filter Thickness (mounted): | 3.5 mm |
| Filter Thickness Tolerance (mou: | ± 0.1 mm |
| Clear Aperture: | ≥ 22 mm |
| Scratch-Dig: | 60-40 |
| Substrate thickness: | 2.0 mm |
| Orientation: | Arrow on ring indicates preferred direction of propagation of light |
| Other physical specs: | Standard Specifications of Our Filters and Beam Splitters |
| : | ---------------------------------------------- |
| Abmessungen: | D = 25 mm |
| Anzahl Bänder/Kanten/Notch: | 1 |
| Art des Filters: | Bandpass |
| Blockungsstärke: | OD 6 |
| Laserwellenlänge: | 1030 |
| CWL/EdgeWL/NotchWL (nm): | 1030 |
| Anwendung (Filter): | Raman |
| Bandbreite (nm): | 4 |
| Substratdicke: | 2,0 mm |
| Scratch-Dig: | 60-40 |
| freie Apertur: | >= 22 mm |