440/521/607/700 HC Quadband Filter
Artikel-Nr.:
F72-888
Produktinformationen "440/521/607/700 HC Quadband Filter"
AOI 0°
Durchmesser 25 mm, Ringdicke 3,5 mm
Durchmesser 25 mm, Ringdicke 3,5 mm
Spezifikationen
| OEM-/Originalnummer: | FF01-440/521/607/700-25 |
|---|---|
| Transmission Band 1: | Tavg > 90% 420 - 460 nm |
| Center Wavelength 1: | 440 nm |
| Guaranteed Minimum Bandwidth 1: | 40 nm |
| FWHM Bandwidth 1 (nominal): | 44 nm |
| Blocking Band 1: | ODavg > 5 275 - 381.5 nm |
| Transmission Band 2: | Tavg > 90% 510.5 - 531.5 nm |
| Center Wavelength 2: | 521 nm |
| Guaranteed Minimum Bandwidth 2: | 21 nm |
| FWHM Bandwidth 2 (nominal): | 26 nm |
| Blocking Band 2: |
ODavg > 8 381.5 - 392.5 nm Design specification measurements are noise-floor limited |
| Transmission Band 3: | Tavg > 90% 590 - 624 nm |
| Center Wavelength 3: | 607 nm |
| Guaranteed Minimum Bandwidth 3: | 34 nm |
| FWHM Bandwidth 3 (nominal): | 40 nm |
| Blocking Band 3: |
ODavg > 8 475 - 495 nm Design specification measurements are noise-floor limited |
| Transmission Band 4: | Tavg > 90% 677.5 - 722.5 nm |
| Center Wavelength 4: | 700 nm |
| Guaranteed Minimum Bandwidth 4: | 45 nm |
| FWHM Bandwidth 4 (nominal): | 52 nm |
| Blocking Band 4: |
ODavg > 8 547 - 572 nm Design specification measurements are noise-floor limited |
| Blocking Band 5: |
ODavg > 8 643 - 656 nm Design specification measurements are noise-floor limited |
| Blocking Band 6: | ODavg > 5 744 - 925 nm |
| Angle of Incidence: | 0 ± 5 degrees |
| Cone Half-angle: | 7 degrees |
| Optical Damage Rating: | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. |
| Substrate type: | low-autofluorescence optical quality glass |
| Transverse Dimensions (Diameter: | 25 mm |
| Transverse Tolerance: | + 0.0 / - 0.1 mm |
| Filter Thickness (mounted): | 3.5 mm |
| Filter Thickness Tolerance (mou: | ± 0.1 mm |
| Clear Aperture: | ≥ 22 mm |
| Scratch-Dig: | 60-40 |
| Substrate thickness: | 2.0 mm |
| Orientation: | Arrow on ring indicates preferred direction of propagation of light |
| Other physical specs: | Standard Specifications of Our Filters and Beam Splitters |
| : | ---------------------------------------------- |
| Abmessungen: | D = 25 mm |
| Anzahl Bänder/Kanten/Notch: | 4 |
| Art des Filters: | Multiband |
| Blockungsstärke: | OD 6 |
| CWL/EdgeWL/NotchWL (nm): | 440, 521, 607, 700 |
| Anwendung (Filter): | Standard/Fluoreszenz |
| Substratdicke: | 2,0 mm |
| Scratch-Dig: | 60-40 |
| freie Apertur: | >= 22 mm |